Shop
Sports floor von WARCO im Farbdesign Terracotta mit den Abmessungen 306 x 306 x 30 mm. Produktfoto von Artikel 4274 in der Aufsicht von schräg vorne.
Detailaufnahme der Randausprägung von WARCO-Produkt 4274, Sports floor, Format 306 x 306 x 30 mm, Farbe Terracotta.
Großaufnahme vom Verbindungssystem von WARCO-Boden 4274 - Sports floor im Farbdesign Terracotta. Abmessungen 306 x 306 x 30 mm.
Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 4274 - Sports floor im Format 306 x 306 x 30 mm.
Typische Verlegung oder Einbausituation für den Artikel 4274 von WARCO - Sports floor, Farbton Terracotta in der Abmessung 306 x 306 x 30 mm.
Sports floor von WARCO im Farbdesign Terracotta mit den Abmessungen 306 x 306 x 30 mm. Produktfoto von Artikel 4274 in der Aufsicht von schräg vorne.
Detailaufnahme der Randausprägung von WARCO-Produkt 4274, Sports floor, Format 306 x 306 x 30 mm, Farbe Terracotta.
Großaufnahme vom Verbindungssystem von WARCO-Boden 4274 - Sports floor im Farbdesign Terracotta. Abmessungen 306 x 306 x 30 mm.
Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 4274 - Sports floor im Format 306 x 306 x 30 mm.
Typische Verlegung oder Einbausituation für den Artikel 4274 von WARCO - Sports floor, Farbton Terracotta in der Abmessung 306 x 306 x 30 mm.

Sports floor CZ "Terracotta"

EAN: 4251469342743 | Item no.: 4274

If you look at the surface of the sports floor, you can see one piece. The structure of the tiles can be only detected only on closer inspection. The impression of homogeneity originates from the high-precise manufacturing of the tiles - they interlock with each other without any open seam and the edges are cut without a chamfer.

That's why the sports floor is suitable for all sports areas, where the highest requirements regarding functionality and design have to be met. The sports floor can be used indoors and outdoors. In case of an outdoor application, an extensively water-permeable base course has to be laid, e.g. a plastic honeycomb grid.

This sports floor is naturally joint-friendly elastic, slip-resistant and provides fall protection. It dams mechanical vibrations and provides a good ball bounce. In the open air it's frost-resistant and water-permeable, so it can be used for playing in all weathers. This product has been manufactured with an enhanced concentration. Thus, it's more resistant against abrasion and mechanical loading, but it's less elastic and open-pored and the damping is worse. It's recommended for surface with normal and enhanced loading.

Colour
Size
306 x 306 x 30 mm
Connecting system
CZ (Tile with cut out zip)
  • €118,28 / 10,75 piece / m²

  • Plus delivery costs

    (2,55 kg /  piece)

  • Realisation time approx.

    7-14 days
piece

Properties

Colour

Terracotta In the colour design Terracotta the natural, warm colour range of clay and loam are reflected. The products in the colour design Terracotta are made of beige, light brown, red and black imbued, granulated EPDM (Ethylene Propylene Diene Monomer) - an age-resistant, weatherproof, high-quality elastomer. The classic design Terracotta ennobles every environment and fits almost all areas of utilisation.

material The tile is two-layered, but monolithic (from one piece). In the rubber granulate of the wear and visible side it's a newly manufactured, imbued EPDM (Ethylene Propylene Diene Monomer). The second, bottom layer is made of the black tyre rubber granulate Styrene-Butadiene Rubber, short SBR. This complex structure is especially favourable for the physical properties and durability of the tile.

Connecting system Every tile is cut out of a larger format with the highest precision. So the zip toothed strip arises that makes a form-fit connection between the adjacent plates while laying. They build a seamless, connected, positionally stable tile carpet of high durability and loadability. Since the plates' edges are sharply cut, the single tiles in the surface are hardly visible in case of the same colour design.

Structure of the underside

The bottom side of the tile - the one in contact with the base course - is structured over the entire surface. The symmetrically arranged network made of 4 mm deep and 15 mm wide draining channels across the tiles optimises the damping and drainage. The tiles are mounted on a bound base course or on a plastic honeycomb grid. Please take note of the laying instruction.

Characteristics

Colourfast and UV resistant

Material and colour are resistant against UV radiation during weathering in a long-term perspective.

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Quickly and simply laid

Easy mounting without special expert knowledge on bound of fixed base courses.

It's rentable and brings joy

The flooring for more comfort and better feeling. Original WARCO product with 5 years warranty.

Weatherproof - in the open air and in buildings

For applications in the open air and under roof. Avoid waterlogging and permanent drenching.

Low-flammable

Building material class Cfl-s1 (EN 13501-1), B1 (DIN 4102-1) low-flammable, low production of smoke.

Suitable for chlorinated water

Resistant against chlorinated water or cleaners and suitable for laying at a swimming pool.

Comparative values

Compressive point-load strength

Compressive point-load strength

The higher the indicated value, the harder the material and the lower the penetration of an object that puts a point-load on the material. Typical point-loads are high-heel shoes, table or chair legs, plant tubs on wheels, some kinds of pedestals for devices and appliances. In individual cases, it can be tested on-site on a material sample if the chosen material has a compression strength sufficient for the desired application.

Elasticity and shock absorption

Elasticity and shock absorption

The higher the indicated value, the more elastic the material and the better it absorbs the shocks (falling objects, steps and kicks, drops). This means also that the material is softer and more flexible and e.g. it leads to a worse ball bounce or worse suitability for vehicle traffic. In special application cases it should be tested by an easy trial with a material sample, if the kinetic energy exerted by the typical object (mass and velocity) is cushioned as requested. If the material is too weak, it will be overloaded, a material with too high stiffness will not give the desired absorption.

Damping of vibrations, structure-borne and impact sound

Damping of vibrations, structure-borne and impact sound

The higher the indicated value, the better the damping of vibrations, structure-borne and impact sound. It causes a better acoustic and mechanic decoupling between the activities on the material and the ground on that the material is laid. While choosing the material, the material parameters compressive strength, elasticity and shock absorption should be always selected according to the planned application, in order to obtain the best long-term results.

Closeness and fine structure of the surface

Closeness and fine structure of the surface

The higher the indicated value, the smoother and more homogenous the material surface. The lower the value, the rougher the surface, the more noticeable the single rubber particles of the material, the more open-pored the surface. The structure of the surface normally affects the water-permeability and slip-resistance, as well as the cleaning-friendliness. The haptic perception of the material reaches from grainy-granular and grippy-rough to smooth or velour-like. Generally, the material surface is always plain and without any unevenness. The exception are the panels with anti-skid elements formed on the surface.

Resistance against abrasion of particles

Resistance against abrasion of particles

The higher the indicated value, the more resistant the material structure against rubbing down of single particles caused by grinding or scrubbing moves. Intensively grinding or scrubbing moves are caused e.g. by car tyres if steered while standing or by dragging heavy furniture over the surface, but also by intensive fitness workouts. However, also on intensively used surfaces, e.g. public places, footpaths or beer gardens the higher abrasive loading of the material can be assumed.

Liquid-permeability and open-pore nature

Liquid-permeability and open-pore nature

The higher the indicated value, the faster the liquids (e.g. water) run through the material and the higher is the amount of liquid able to pass the material in a given time period. The value applies for clean material. In case of clogged pores, e.g. ill-kempt stall mats in a horsebox, the flow is obstructed or impossible. Good liquid-permeability is important in the outdoor areas, because it prevents puddle formation and soil sealing. Indoors a close-pored material doesn't let the washing water or spilled drinks penetrate into it.

Skid resistance in the wet and dry state

Skid resistance in the wet and dry state

The higher the indicated value, the higher the level of skid resistance of the material surface in the wet or dry state.

Heat insulation and insulation against ground cold

Heat insulation and insulation against ground cold

The higher the indicated value, the better the insulation of the material against heat and coldness. The material is not a replacement for heat insulating materials, but it significantly improves the comfort feeling. In a gym, but also in a balcony or terrace the material insulated against the ground cold; the botty will not get cold. There is a similar effect in the stall mats in the horse keeping or dog kennel mats. In the winter, the workplace mats assure dry and not so cold feet is sales booths.

Frost resistance and suitability for permanent wetting

Frost resistance and suitability for permanent wetting

The higher the indicated value, the more suitable the material for usage in areas, where a permanent wetting (e.g. rainy weather periods or application in wet rooms) or frosty periods can occur. The rubber can swell up when permanently drenched; the material can expand up to 2%. The drenching can be avoided by a good draining in the material (liquid-permeability) and under the material (draining bottom side).

Wear resistance of the colour design

Wear resistance of the colour design

The higher the indicated value, the more durable and stable the colour design. The value is explicitly related to the usage-dependent stability of the colour design (wear resistance e.g. against scouring or stamping), but not for separately estimated, possible colour changes caused by the UV radiation (sunlight). As a general rule, the materials made of imbued rubber (coloured though and through like a minced jellybaby) have a significantly higher colour fastness than the materials where the (normally black) rubber is processed with a coloured binder and have only a coloured coating.

Lade Produktbewertungen

Matching accessories

Versandregion wählen
Zur Berechnung der Versandkosten wäre es hilfreich, wenn Sie uns jetzt schon das Land nennen könnten, in welches geliefert werden soll.