Fitness floor HZ "Anthracite"

€13,40

7-14 days

Plus delivery costs
/
Realisation time approx.
7-14 days
€53,60 / 4 piece / m²
(5,60 kg / piece)

EAN: 4251469312777 | Item no.: 1277

The classic fitness floor is built by a toolless assembly of square tiles to a form-fit tile carpet with a traditionally-looking joint pattern. The fitness floor can be laid both indoors and outdoors. If the fitness surfaces are used only temporarily, the flooring can be disassembled without any damage and laid elsewhere.

The high-quality fitness floor is water-permeable and carefree. It's optimised in the damping against vibrations and impact (dropping the barbells) and provides a good thermal insulation. This product has been manufactured with an enhanced concentration. Thus, it's more resistant against abrasion and mechanical loading, but it's less elastic and open-pored and the damping is worse. It's recommended for surface with normal and enhanced loading.

The product data sheet to print

Fitness floor von WARCO im Farbdesign Anthracite mit den Abmessungen 500 x 500 x 30 mm. Produktfoto von Artikel 1277 in der Aufsicht von schräg vorne.

Detailaufnahme der Randausprägung von WARCO-Produkt 1277, Fitness floor, Format 500 x 500 x 30 mm, Farbe Anthracite.

Großaufnahme vom Verbindungssystem von WARCO-Boden 1277 - Fitness floor im Farbdesign Anthracite. Abmessungen 500 x 500 x 30 mm.

Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 1277 - Fitness floor im Format 500 x 500 x 30 mm.

Typische Verlegung oder Einbausituation für den Artikel 1277 von WARCO - Fitness floor, Farbton Anthracite in der Abmessung 500 x 500 x 30 mm.

Anthracite (active)
Brick red + €0,90
Chocolate brown + €1,80
Grass green + €1,80
Slate grey + €1,80

Compare

Discount:

Calculation of quantity

0 m²

0 piece

The product data sheet to print

The advantages of WARCO

Limitedly UV resistant

The ageing and lifetime of the product depend on the intensity of the UV radiation (sunlight).

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Weatherproof - indoors and outdoors

Recommended for areas in buildings and in the open air. Assure the drainage on or in the base course.

Normally inflammable (efl)

Building material class Efl (EN 13501-1), B2 (DIN 4102-1). Authority denomination: normally inflammable.

Colour
Anthracite

A car tyre is made of black dyed rubber (SBR). That's why the rubber granulate made of car tyres is also black. During processing with a colourless binder, black products are made. Similarly to the car tyres, the colour changes in these products after a short time from full black to a dark grey, also known as anthracite.

Material

The rubber granulate with irregularly formed particles is obtained from discarded tyres. It mainly consists in the high-valuable mix of natural rubber (NR) and synthetically manufactured Styrene-Butadiene Rubber (SBR). The material properties of the WARCO preform largely correspond to those known from SBR. The granulate with an edge length from 1.0 to 3.0 mm creates fine-grained surfaces.

Assembly or connection system

There is a strong mounting system consisting in an overlap and a dovetail joint formed into the edges of every tile. Thus, a form-fit, permanently loadable connection is created between the plates while laying. However, the zip is not visible in the surface. This type of tiles unites the best possible connection system for rubber granulate tiles with a classic, rectangular seam design of a chequerboard.

Structure of the underside

A drainage system consisting in 4 mm deep drainage channels across the elements and about 15 mm deep hemispherical domes is formed into the bottom side of the tiles. The tiles can be laid on almost every workable base course, also unbound. Please take note of the laying instruction.