Fall protection stair covering Pro BZ "Anthracite"

€10,30

7-14 days

Plus delivery costs
/
Realisation time approx.
7-14 days
€41,20 / 4 piece / m²
(4,08 kg / piece)

EAN: 4251469301825 | Item no.: 0182

The impact-elastic fall protection stair covering Pro not only makes the stairs in the building or in the open air more aesthetic, but also more safe. It's slip-resistant in wet and dry conditions and due to the integrated fall protection it prevents trip injuries. The frost-resistant stair covering is water-permeable and quick-drying. It brilliantly quietens the impact noise.

The economical fall protection stair covering Pro consists in single plates. At the site, they can be cut to measure or, if needed, joint together to larger elements and pasted on the existing stairs. This product has been manufactured with an enhanced concentration. Thus, it's more resistant against abrasion and mechanical loading, but it's less elastic and open-pored and the damping is worse. It's recommended for surface with normal and enhanced loading.

The product data sheet to print

Fall protection stair covering Pro von WARCO im Farbdesign Anthracite mit den Abmessungen 500 x 500 x 18 mm. Produktfoto von Artikel 0182 in der Aufsicht von schräg vorne.

Detailaufnahme der Randausprägung von WARCO-Produkt 0182, Fall protection stair covering Pro, Format 500 x 500 x 18 mm, Farbe Anthracite.

Großaufnahme vom Verbindungssystem von WARCO-Boden 0182 - Fall protection stair covering Pro im Farbdesign Anthracite. Abmessungen 500 x 500 x 18 mm.

Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 0182 - Fall protection stair covering Pro im Format 500 x 500 x 18 mm.

Typische Verlegung oder Einbausituation für den Artikel 0182 von WARCO - Fall protection stair covering Pro, Farbton Anthracite in der Abmessung 500 x 500 x 18 mm.

Anthracite (active)
Brick red + €0,80
Chocolate brown + €0,80
Slate grey + €1,80
Grass green + €1,80

Package dimensions

540 x 540 x 18 mm

The packaging dimensions include the dimensions of the mounting system.

Product type BZ (Puzzle connection | Edges slightly rounded | Flat drainage profile on the floor side)

Compare

Discount:

Calculation of quantity

0 m²

0 piece

The product data sheet to print

The advantages of WARCO

Limitedly UV resistant

The ageing and lifetime of the product depend on the intensity of the UV radiation (sunlight).

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

For weatherproof areas, also outdoors

For weatherproof areas, but also outdoors. Avoid waterlogging and permanent drenching.

Normally inflammable (efl)

Building material class Efl (EN 13501-1), B2 (DIN 4102-1). Authority denomination: normally inflammable.

Colour
Anthracite

A car tyre is made of black dyed rubber (SBR). That's why the rubber granulate made of car tyres is also black. During processing with a colourless binder, black products are made. Similarly to the car tyres, the colour changes in these products after a short time from full black to a dark grey, also known as anthracite.

Material

The rubber granulate with irregularly formed particles is obtained from discarded tyres. It mainly consists in the high-valuable mix of natural rubber (NR) and synthetically manufactured Styrene-Butadiene Rubber (SBR). The material properties of the WARCO preform largely correspond to those known from SBR. The granulate with an edge length from 1.0 to 3.0 mm creates fine-grained surfaces.

Assembly or connection system

The edges of every tile are formed as a zip toothed strip (dovetail joint). Due to the interlocking of the plates during the laying and the form-fit connection arising this way, a permanently connected, positionally stable tile carpet. That's why the plates (normally) aren't connected with (pasted to) the base course. The connection of the rubber granulate tiles as a zip is particularly stable, durable and safe.

Structure of the underside

A network of 4 mm deep drainage channels across the elements is formed into the bottom side of the tiles - the one in contact with the base course. The tiles are mounted on an appropriate bound base course. Please take note of the laying instruction.