Shop
Edge tile (one chamfered side) von WARCO im Farbdesign Savannah mit den Abmessungen 500 x 500 x 100 mm. Produktfoto von Artikel 3809 in der Aufsicht von schräg vorne.
Detailaufnahme der Randausprägung von WARCO-Produkt 3809, Edge tile (one chamfered side), Format 500 x 500 x 100 mm, Farbe Savannah.
Großaufnahme vom Verbindungssystem von WARCO-Boden 3809 - Edge tile (one chamfered side) im Farbdesign Savannah. Abmessungen 500 x 500 x 100 mm.
Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 3809 - Edge tile (one chamfered side) im Format 500 x 500 x 100 mm.
Typische Verlegung oder Einbausituation für den Artikel 3809 von WARCO - Edge tile (one chamfered side), Farbton Savannah in der Abmessung 500 x 500 x 100 mm.
Edge tile (one chamfered side) von WARCO im Farbdesign Savannah mit den Abmessungen 500 x 500 x 100 mm. Produktfoto von Artikel 3809 in der Aufsicht von schräg vorne.
Detailaufnahme der Randausprägung von WARCO-Produkt 3809, Edge tile (one chamfered side), Format 500 x 500 x 100 mm, Farbe Savannah.
Großaufnahme vom Verbindungssystem von WARCO-Boden 3809 - Edge tile (one chamfered side) im Farbdesign Savannah. Abmessungen 500 x 500 x 100 mm.
Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 3809 - Edge tile (one chamfered side) im Format 500 x 500 x 100 mm.
Typische Verlegung oder Einbausituation für den Artikel 3809 von WARCO - Edge tile (one chamfered side), Farbton Savannah in der Abmessung 500 x 500 x 100 mm.

Edge tile (one chamfered side) FI "Savannah"

EAN: 4251469338098 | Item no.: 3809

The edge tile with one chamfered side is a useful and system-compatible addition to the rubber granulate tiles type FS. The edge tile is used for avoiding trip hazard that can occur at the transition to the rubber granulate surface in case only one section is paved with rubber granulate slabs. It also helps compensate the level difference between the ground and rubber plates surface. Trip accidents can be avoided and smooth driving on it with a wheelchair, a baby buggy or a rollator is possible.

A typical application case is a play island covered with fall protection tiles in a plastered pavement or an asphalted schoolyard. The edge tile is always stuck together with the underfloor and stabilised with a rubber granulate tile surface.

Colour
Dimensions
500 x 500 x 100 mm
Type or design
FI (4 connectors included - slightly rounded edges - strongly profiled underside)
  • €231,20 / 4 piece / m²

  • Plus delivery costs

    (18,60 kg /  piece)

  • Realisation time approx.

    7-14 days
piece

Properties

Colour Savannah The colour design is based on the pastel beige typical for the African savannah and lime green colour hues on a black base. The products in the colour design Savannah are made of a fully colourful EPDM granulate - colourful through and through. EPDM (Ethylene Propylene Diene Monomer) is a UV resistant, weatherproof and especially robust rubber. The subtle and pleasant colour design Savannah fits every environment with its natural wood look, unintrusively and without artificial look.

material The tile is two-layered, but monolithic (from one piece). In the rubber granulate of the wear and visible side it's a newly manufactured, imbued EPDM (Ethylene Propylene Diene Monomer). The second, bottom layer is made of the black tyre rubber granulate Styrene-Butadiene Rubber, short SBR. This complex structure is especially favourable for the physical properties and durability of the tile.

Assembly The tiles are laid edge to edge in the 50% offset. This means, the plates in one row are displaced a half-length of the tile towards the adjacent rows. Four plastic connectors included to each tile join the adjacent rows together. Every plate is connected to 2 tiles from the previous and 2 tiles from the next row. However, this connection is not stable and doesn't prevent the plates from drifting apart, so that the surface has to be bordered.

Structure of the underside

Contrary to the standard tiles with connectors, this tile has a homogenous cross section without structured bottom side, without formed drainage. It's laid on an appropriate, bound or unbound base course or on a plastic honeycomb grid. It can be useful to paste it on the base course. Please take note of the laying instruction.

Characteristics

Colourfast and UV resistant

Material and colour are resistant against UV radiation during weathering in a long-term perspective.

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Quickly and simply laid

Easy mounting without special expert knowledge on bound of fixed base courses.

Well and favourable invested money

Safe investment due to the original WARCO product with 5 years warranty - proved thousands of times.

Weatherproof - indoors and outdoors

Recommended for areas in buildings and in the open air. Assure the drainage on or in the base course.

Low-flammable (cfl-s1)

Building material class Cfl-s1 (EN 13501-1), B1 (DIN 4102-1) low-flammable, low production of smoke.

Suitable for chlorinated water

Resistant against chlorinated water or cleaners and suitable for laying at a swimming pool.

Comparative values

Compressive point-load strength

Compressive point-load strength

The higher the indicated value, the harder the material and the lower the penetration of an object that puts a point-load on the material. Typical point-loads are high-heel shoes, table or chair legs, plant tubs on wheels, some kinds of pedestals for devices and appliances. In individual cases, it can be tested on-site on a material sample if the chosen material has a compression strength sufficient for the desired application.

Elasticity and shock absorption

Elasticity and shock absorption

The higher the indicated value, the more elastic the material and the better it absorbs the shocks (falling objects, steps and kicks, drops). This means also that the material is softer and more flexible and e.g. it leads to a worse ball bounce or worse suitability for vehicle traffic. In special application cases it should be tested by an easy trial with a material sample, if the kinetic energy exerted by the typical object (mass and velocity) is cushioned as requested. If the material is too weak, it will be overloaded, a material with too high stiffness will not give the desired absorption.

Damping of vibrations, structure-borne and impact sound

Damping of vibrations, structure-borne and impact sound

The higher the indicated value, the better the damping of vibrations, structure-borne and impact sound. It causes a better acoustic and mechanic decoupling between the activities on the material and the ground on that the material is laid. While choosing the material, the material parameters compressive strength, elasticity and shock absorption should be always selected according to the planned application, in order to obtain the best long-term results.

Closeness and fine structure of the surface

Closeness and fine structure of the surface

The higher the indicated value, the smoother and more homogenous the material surface. The lower the value, the rougher the surface, the more noticeable the single rubber particles of the material, the more open-pored the surface. The structure of the surface normally affects the water-permeability and slip-resistance, as well as the cleaning-friendliness. The haptic perception of the material reaches from grainy-granular and grippy-rough to smooth or velour-like. Generally, the material surface is always plain and without any unevenness. The exception are the panels with anti-skid elements formed on the surface.

Resistance against abrasion of particles

Resistance against abrasion of particles

The higher the indicated value, the more resistant the material structure against rubbing down of single particles caused by grinding or scrubbing moves. Intensively grinding or scrubbing moves are caused e.g. by car tyres if steered while standing or by dragging heavy furniture over the surface, but also by intensive fitness workouts. However, also on intensively used surfaces, e.g. public places, footpaths or beer gardens the higher abrasive loading of the material can be assumed.

Liquid-permeability and open-pore nature

Liquid-permeability and open-pore nature

The higher the indicated value, the faster the liquids (e.g. water) run through the material and the higher is the amount of liquid able to pass the material in a given time period. The value applies for clean material. In case of clogged pores, e.g. ill-kempt stall mats in a horsebox, the flow is obstructed or impossible. Good liquid-permeability is important in the outdoor areas, because it prevents puddle formation and soil sealing. Indoors a close-pored material doesn't let the washing water or spilled drinks penetrate into it.

Skid resistance in the wet and dry state

Skid resistance in the wet and dry state

The higher the indicated value, the higher the level of skid resistance of the material surface in the wet or dry state.

Heat insulation and insulation against ground cold

Heat insulation and insulation against ground cold

The higher the indicated value, the better the insulation of the material against heat and coldness. The material is not a replacement for heat insulating materials, but it significantly improves the comfort feeling. In a gym, but also in a balcony or terrace the material insulated against the ground cold; the botty will not get cold. There is a similar effect in the stall mats in the horse keeping or dog kennel mats. In the winter, the workplace mats assure dry and not so cold feet is sales booths.

Frost resistance and suitability for permanent wetting

Frost resistance and suitability for permanent wetting

The higher the indicated value, the more suitable the material for usage in areas, where a permanent wetting (e.g. rainy weather periods or application in wet rooms) or frosty periods can occur. The rubber can swell up when permanently drenched; the material can expand up to 2%. The drenching can be avoided by a good draining in the material (liquid-permeability) and under the material (draining bottom side).

Wear resistance of the colour design

Wear resistance of the colour design

The higher the indicated value, the more durable and stable the colour design. The value is explicitly related to the usage-dependent stability of the colour design (wear resistance e.g. against scouring or stamping), but not for separately estimated, possible colour changes caused by the UV radiation (sunlight). As a general rule, the materials made of imbued rubber (coloured though and through like a minced jellybaby) have a significantly higher colour fastness than the materials where the (normally black) rubber is processed with a coloured binder and have only a coloured coating.

Lade Produktbewertungen

Matching accessories

Versandregion wählen
Zur Berechnung der Versandkosten wäre es hilfreich, wenn Sie uns jetzt schon das Land nennen könnten, in welches geliefert werden soll.