Shop
Corner tile (two chamfered sides) von WARCO im Farbdesign Travertine mit den Abmessungen 500 x 500 x 100 mm. Produktfoto von Artikel 3822 in der Aufsicht von schräg vorne.
Detailaufnahme der Randausprägung von WARCO-Produkt 3822, Corner tile (two chamfered sides), Format 500 x 500 x 100 mm, Farbe Travertine.
Großaufnahme vom Verbindungssystem von WARCO-Boden 3822 - Corner tile (two chamfered sides) im Farbdesign Travertine. Abmessungen 500 x 500 x 100 mm.
Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 3822 - Corner tile (two chamfered sides) im Format 500 x 500 x 100 mm.
Typische Verlegung oder Einbausituation für den Artikel 3822 von WARCO - Corner tile (two chamfered sides), Farbton Travertine in der Abmessung 500 x 500 x 100 mm.
Corner tile (two chamfered sides) von WARCO im Farbdesign Travertine mit den Abmessungen 500 x 500 x 100 mm. Produktfoto von Artikel 3822 in der Aufsicht von schräg vorne.
Detailaufnahme der Randausprägung von WARCO-Produkt 3822, Corner tile (two chamfered sides), Format 500 x 500 x 100 mm, Farbe Travertine.
Großaufnahme vom Verbindungssystem von WARCO-Boden 3822 - Corner tile (two chamfered sides) im Farbdesign Travertine. Abmessungen 500 x 500 x 100 mm.
Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 3822 - Corner tile (two chamfered sides) im Format 500 x 500 x 100 mm.
Typische Verlegung oder Einbausituation für den Artikel 3822 von WARCO - Corner tile (two chamfered sides), Farbton Travertine in der Abmessung 500 x 500 x 100 mm.

Corner tile (two chamfered sides) FL "Travertine"

EAN: 4251469338227 | Item no.: 3822

The corner tile with two chamfered sides arranged perpendicularly to each other is a useful and system-compatible addition to the rubber granulate tiles type FS. The corner tile is used between two perpendicularly situated edge tiles FI to build a corner without any trip hazard. Edge tiles and corner tiles are used if only a section of the ground should be covered with rubber granulate plates. Usage of the corner tile helps smoothly compensate the level difference between the ground and the rubber slabs surface. That's how the danger of accident can be reduced.

A typical application case is a play island covered with fall protection tiles in a plastered pavement or an asphalted schoolyard. The corner tile is always stuck on the existing flooring.

Colour
Dimensions
500 x 500 x 100 mm
Type or design
FL (4 connectors included - slightly rounded edges - strongly profiled underside)
  • €213,60 / 4 piece / m²

  • Plus delivery costs

    (15,31 kg /  piece)

  • Realisation time approx.

    7-14 days
piece

Properties

Colour Travertine Products in the classic colour design Travertin are made of a colourful, imbued beige and black EPDM rubber granulate. EPDM (Ethylene Propylene Diene Monomer) is a UV resistant, weatherproof and top-quality rubber. The colour design Travertin is bright and pleasant, patterned on the natural material. It fits almost every classic, traditional or modern environment.

material The tile is two-layered, but monolithic (from one piece). In the rubber granulate of the wear and visible side it's a newly manufactured, imbued EPDM (Ethylene Propylene Diene Monomer). The second, bottom layer is made of the black tyre rubber granulate Styrene-Butadiene Rubber, short SBR. This complex structure is especially favourable for the physical properties and durability of the tile.

Assembly The tiles are laid edge to edge in the 50% offset. This means, the plates in one row are displaced a half-length of the tile towards the adjacent rows. Four plastic connectors included to each tile join the adjacent rows together. Every plate is connected to 2 tiles from the previous and 2 tiles from the next row. However, this connection is not stable and doesn't prevent the plates from drifting apart, so that the surface has to be bordered.

Structure of the underside

Contrary to the standard tiles with connectors, this tile has a homogenous cross section without structured bottom side, without formed drainage. It's laid on an appropriate, bound or unbound base course or on a plastic honeycomb grid. It can be useful to paste it on the base course. Please take note of the laying instruction.

Characteristics

Colourfast and UV resistant

Material and colour are resistant against UV radiation during weathering in a long-term perspective.

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Quickly and simply laid

Easy mounting without special expert knowledge on bound of fixed base courses.

Well and favourable invested money

Safe investment due to the original WARCO product with 5 years warranty - proved thousands of times.

Weatherproof - indoors and outdoors

Recommended for areas in buildings and in the open air. Assure the drainage on or in the base course.

Low-flammable (cfl-s1)

Building material class Cfl-s1 (EN 13501-1), B1 (DIN 4102-1) low-flammable, low production of smoke.

Suitable for chlorinated water

Resistant against chlorinated water or cleaners and suitable for laying at a swimming pool.

Comparative values

Compressive point-load strength

Compressive point-load strength

The higher the indicated value, the harder the material and the lower the penetration of an object that puts a point-load on the material. Typical point-loads are high-heel shoes, table or chair legs, plant tubs on wheels, some kinds of pedestals for devices and appliances. In individual cases, it can be tested on-site on a material sample if the chosen material has a compression strength sufficient for the desired application.

Elasticity and shock absorption

Elasticity and shock absorption

The higher the indicated value, the more elastic the material and the better it absorbs the shocks (falling objects, steps and kicks, drops). This means also that the material is softer and more flexible and e.g. it leads to a worse ball bounce or worse suitability for vehicle traffic. In special application cases it should be tested by an easy trial with a material sample, if the kinetic energy exerted by the typical object (mass and velocity) is cushioned as requested. If the material is too weak, it will be overloaded, a material with too high stiffness will not give the desired absorption.

Damping of vibrations, structure-borne and impact sound

Damping of vibrations, structure-borne and impact sound

The higher the indicated value, the better the damping of vibrations, structure-borne and impact sound. It causes a better acoustic and mechanic decoupling between the activities on the material and the ground on that the material is laid. While choosing the material, the material parameters compressive strength, elasticity and shock absorption should be always selected according to the planned application, in order to obtain the best long-term results.

Closeness and fine structure of the surface

Closeness and fine structure of the surface

The higher the indicated value, the smoother and more homogenous the material surface. The lower the value, the rougher the surface, the more noticeable the single rubber particles of the material, the more open-pored the surface. The structure of the surface normally affects the water-permeability and slip-resistance, as well as the cleaning-friendliness. The haptic perception of the material reaches from grainy-granular and grippy-rough to smooth or velour-like. Generally, the material surface is always plain and without any unevenness. The exception are the panels with anti-skid elements formed on the surface.

Resistance against abrasion of particles

Resistance against abrasion of particles

The higher the indicated value, the more resistant the material structure against rubbing down of single particles caused by grinding or scrubbing moves. Intensively grinding or scrubbing moves are caused e.g. by car tyres if steered while standing or by dragging heavy furniture over the surface, but also by intensive fitness workouts. However, also on intensively used surfaces, e.g. public places, footpaths or beer gardens the higher abrasive loading of the material can be assumed.

Liquid-permeability and open-pore nature

Liquid-permeability and open-pore nature

The higher the indicated value, the faster the liquids (e.g. water) run through the material and the higher is the amount of liquid able to pass the material in a given time period. The value applies for clean material. In case of clogged pores, e.g. ill-kempt stall mats in a horsebox, the flow is obstructed or impossible. Good liquid-permeability is important in the outdoor areas, because it prevents puddle formation and soil sealing. Indoors a close-pored material doesn't let the washing water or spilled drinks penetrate into it.

Skid resistance in the wet and dry state

Skid resistance in the wet and dry state

The higher the indicated value, the higher the level of skid resistance of the material surface in the wet or dry state.

Heat insulation and insulation against ground cold

Heat insulation and insulation against ground cold

The higher the indicated value, the better the insulation of the material against heat and coldness. The material is not a replacement for heat insulating materials, but it significantly improves the comfort feeling. In a gym, but also in a balcony or terrace the material insulated against the ground cold; the botty will not get cold. There is a similar effect in the stall mats in the horse keeping or dog kennel mats. In the winter, the workplace mats assure dry and not so cold feet is sales booths.

Frost resistance and suitability for permanent wetting

Frost resistance and suitability for permanent wetting

The higher the indicated value, the more suitable the material for usage in areas, where a permanent wetting (e.g. rainy weather periods or application in wet rooms) or frosty periods can occur. The rubber can swell up when permanently drenched; the material can expand up to 2%. The drenching can be avoided by a good draining in the material (liquid-permeability) and under the material (draining bottom side).

Wear resistance of the colour design

Wear resistance of the colour design

The higher the indicated value, the more durable and stable the colour design. The value is explicitly related to the usage-dependent stability of the colour design (wear resistance e.g. against scouring or stamping), but not for separately estimated, possible colour changes caused by the UV radiation (sunlight). As a general rule, the materials made of imbued rubber (coloured though and through like a minced jellybaby) have a significantly higher colour fastness than the materials where the (normally black) rubber is processed with a coloured binder and have only a coloured coating.

Lade Produktbewertungen

Matching accessories

Versandregion wählen
Zur Berechnung der Versandkosten wäre es hilfreich, wenn Sie uns jetzt schon das Land nennen könnten, in welches geliefert werden soll.