Anti trip wedge RM "Anthracite"

€16,80

1-3 days

Plus delivery costs
/
Realisation time approx.
1-3 days
€22,40 / 1,33 piece / lm
(3,00 kg / piece)

EAN: 4251469323025 | Item no.: 2302

The anti trip wedge is an additional element to the rubber granulate tiles and is applied for levelling up the height difference between two flooring areas - as a ramp: safely and smoothly. Typical application cases are training islands made of fitness floor mats in a gym, playground equipment secured with fall protection tiles in a part of a schoolyard or covering the composite paving with elastic tiles.

Thus, in every case it is about sections of paved areas covered with rubber granulate tiles. The smooth transition zone between the paved into the covered area has a form of a wedge can be used by trolleys, wagons and vehicles. If needed, it can be stuck with the PU glue or double-sided adhesive tape to the underfloor.

The product data sheet to print

Anti trip wedge von WARCO im Farbdesign Anthracite mit den Abmessungen 750 x 300 x 25/8 mm. Produktfoto von Artikel 2302 in der Aufsicht von schräg vorne.

Detailaufnahme der Randausprägung von WARCO-Produkt 2302, Anti trip wedge, Format 750 x 300 x 25/8 mm, Farbe Anthracite.

Großaufnahme vom Verbindungssystem von WARCO-Boden 2302 - Anti trip wedge im Farbdesign Anthracite. Abmessungen 750 x 300 x 25/8 mm.

Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 2302 - Anti trip wedge im Format 750 x 300 x 25/8 mm.

Typische Verlegung oder Einbausituation für den Artikel 2302 von WARCO - Anti trip wedge, Farbton Anthracite in der Abmessung 750 x 300 x 25/8 mm.

Foto der hinteren Seite vom unsymmetrischen WARCO-Formteil 2302: Anti trip wedge, Design Anthracite, Maße 750 x 300 x 25/8 mm.

Anthracite (active)
Brick red + €0,90
Slate grey + €1,60
Chocolate brown + €1,60
Grass green + €1,60

Compare

Discount:

Calculation of quantity

0 m²

0 piece

The product data sheet to print

The advantages of WARCO

Limitedly UV resistant

The ageing and lifetime of the product depend on the intensity of the UV radiation (sunlight).

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Weatherproof - indoors and outdoors

Recommended for areas in buildings and in the open air. Avoid waterlogging and assure the water outlet.

Normally inflammable (efl)

Building material class Efl (EN 13501-1), B2 (DIN 4102-1). Authority denomination: normally inflammable.

Colour
Anthracite

A car tyre is made of black dyed rubber (SBR). That's why the rubber granulate made of car tyres is also black. During processing with a colourless binder, black products are made. Similarly to the car tyres, the colour changes in these products after a short time from full black to a dark grey, also known as anthracite.

Material

The rubber granulate with irregularly formed particles is obtained from discarded tyres. It mainly consists in the high-valuable mix of natural rubber (NR) and synthetically manufactured Styrene-Butadiene Rubber (SBR). The material properties of the WARCO preform largely correspond to those known from SBR. The granulate with an edge length from 1.0 to 3.0 mm creates fine-grained surfaces.

Assembly or connection system

The wedge element has an anti-skid, rough bottom side. For a temporary use, it can be simply laid on an appropriate base course. In other cases it's good to fix it - preferably with a permanently elastic WARCO PU glue or (for sensitive grounds) with double-sided adhesive tape.

Structure of the underside

A network of 4 mm deep drainage channels across the elements is formed into the bottom side of the ramp - the one in contact with the base course. The elements are laid on an appropriate bound base course. Please take note of the laying instruction.